Apm Configuration - Asus P5SD2-X SE Installation Manual

2.5.5

APM Configuration

Power Button Mode
AC Power Loss Restart
Power On By PS2 Keyboard
Power On By PS2 Mouse
Power On By Internal MAC LAN
Power On By PCI Devices
Power On By External Modems
Power On By RTC Alarm
Power Button Mode [On/Off]
Allows the system to go into On/Off mode or suspend mode when the
power button is pressed. Configuration options: [On/Off] [Suspend]
AC Power Loss Restart [Always Off]
When set to [Always Off], the system goes into off state after an AC
power loss. When set to [Always On], the system goes on after an AC
power loss. When set to [Previous State], the system goes into either off
or on state, whatever the system state was before the AC power loss.
Configuration options: [Always Off] [Always On] [Previous State]
Power On By PS/2 Keyboard [Disabled]
Allows you to use specific keys on the keyboard to turn on the system.
This feature requires an ATX power supply that provides at least 1A on the
+5VSB lead. Configuration options: [Disabled] [Enabled]
Power On By PS/2 Mouse [Disabled]
When set to [Enabled], this parameter allows you to use the PS/2 mouse
to turn on the system. This feature requires an ATX power supply that
provides at least 1A on the +5VSB lead.
Configuration options: [Disabled] [Enabled]
Power On By Internal MAC LAN [Disabled]
Allows to enable/disable MAC wake from sleep states.
Power On By PCI Devices [Disabled]
When set to [Enabled], this parameter allows you to turn on the system
through a PCI LAN or modem card. This feature requires an ATX power
supply that provides at least 1A on the +5VSB lead.
Configuration options: [Disabled] [Enabled]
ASUS P5SD2-X SE
[On/Off]
[Always Off]
[Disabled]
[Disabled]
[Disabled]
[Disabled]
[Disabled]
[Disabled]
2-27