Cpu And Chassis Fan Connectors - Asus P5SD2-X SE Installation Manual

3. Serial ATA connectors(7-pin SATA1, SATA2)
These connectors are for the Serial ATA signal cables for Serial ATA
hard disk drives.
®
P5SD2-X SE SATA Connectors
Install the Windows
Pack1 before using Serial ATA.
4.

CPU and Chassis fan connectors

(4-pin CPU_FAN, 3-pin CHA_FAN)
The fan connectors support cooling fans of 350mA~2000mA (24W
max.) or a total of 1A~3.48A (41.36W max.) at +12V. Connect the
fan cables to the fan connectors on the motherboard, making sure
that the black wire of each cable matches the ground pin of the
connector.
Do not forget to connect the fan cables to the fan connectors.
Insufficient air flow inside the system may damage the motherboard
components. These are not jumpers! DO NOT place jumper caps on the
fan connectors.
®
P5SD2-X SE Fan Connectors
ASUS P5SD2-X SE
SATA1
SATA2
2000 Service Pack 4 or the Windows
®
CPU_FAN
GND
CPU FAN PWR
CPU FAN IN
CPU FAN PWM
CHA_FAN
GND
+12V
Rotation
XP Service
®
1-27