Installing The Cpu - Asus P5Q-VM - Motherboard - Micro ATX User Manual

1.6.1

Installing the CPU

To install a CPU:
1. Locate the CPU socket on the motherboard.
Before installing the CPU, make sure that the cam box is facing towards you
and the load lever is on your left.
2. Press the load lever with your
thumb (A), then move it to the left
(B) until it is released from the
retention tab.
To prevent damage to the
socket pins, do not remove
the PnP cap unless you are
installing a CPU.
3. Lift the load lever in the direction of
the arrow to a 135º angle.
4. Lift the load plate with your thumb
and forefinger to a 100º angle (4A),
then push the PnP cap from the
load plate window to remove (4B).
1-14
Retention tab
A
B
Load lever
PnP cap
Load plate
4B
3
Chapter 1: Product introduction
4A