ASROCK K7NF2-RAID Installation And Configuration Manual page 17

After you press <F10>, the NVIDIA RAID Utility - Define a New Array
window appears. By default, RAID Mode is set to Mirroring, but
please set it to Spanning if you want to create RAID JBOD. And
the Striping Block is set to Optimal as default.
RAID Mode :
Mirroring
Free Disks
Mirroring
Loc Disk
Striping
Striple Mirroring
1.0.M Maxt
Spanning
1.1.M Maxt
[ESC] Quit [F6] Back [F7] Finish [TAB] Navigate [ ] Select [ENTER] Popup
Then, for the following steps, please to refer to the detail description
in RAID 0. And you will see the below windows.
RAID Mode :
Spanning
Free Disks
Loc Disk Model Name
1.0.M Maxt 6Y120M0
1.1.M Maxt 6Y120M0
[ESC] Quit [F6] Back [F7] Finish [TAB] Navigate [ ] Select [ENTER] Popup
NVIDIA RAID Utility Jan 12 2005
- Define a New Array -
Stripimg Block :
Array Disks
Loc
[ ]Add
[ ]Del
NVIDIA RAID Utility Jan 12 2005
- Define a New Array -
Stripimg Block :
Array Disks
Loc
[ ]Add
[ ]Del
17
Optimal
Disk Model Name
Optimal
8K
Disk Model
16K
32K
64K
128K
Optim