ASROCK K7NF2-RAID Installation And Configuration Manual page 12

Depending on the platform used, the system can have one or more
channels. In a typical system there is usually one adapter and multiple
channels, and each channel has a slave and a master. The adapter /
channel / master / slave status of each hard disk is given in the Loc
(location) columns of the Free Disks and Array Disks lists. For
example:
1 . 0 . M
Serial ATA
1 . 0 . M Channel 1, controller 0, Master
1 . 1 . M Channel 1, controller 1, Master
Finally, the Array List window appears, where you can review the
RAID arrays that you have set up.
Boot Id
Yes 2
[Ctrl-X]Exit [
M: Master
S: Slave
Controller
Channel - Typically, channel 0 is used for
Parallel ATA drives while channel 1 is used for
Serial ATA drives.
NVIDIA RAID Utility
- Array List -
Status Vendor Array Model Name
Healthy NVIDIA STRIPING 74.53G
]Select [B]Set Boot [N]New Array [ENTER]Detail
12