ASROCK K7NF2-RAID Installation And Configuration Manual page 11

Striping block size is given in kilobytes, and affect how data is
arranged on the disk. It is recommended to leave this value at the
default Optimal, which is 64KB, but the values can be between 8KB
and 128KB (8, 16, 32, 64, and 128KB). Then, you have to assign the
disks. The disks that you enabled from the RAID Config BIOS setup
page appear in the Free Disks block. These are the drives that are
available for use as RAID array disk,
1. Tab to the Free Disks section.
The first disk in the list is selected.
2. Move it from the Free Disks block to the Array Disks block by
pressing the right-arrow key.
3. Continue pressing the right-arrow key until all the disks that you
want to use as RAID array disks appear in the Array Disks block.
RAID Mode :
Striping
Free Disks
Loc Disk Model Name
1.0.M Maxt 6Y120M0
1.1.M Maxt 6Y120M0
[ESC] Quit [F6] Back [F7] Finish [TAB] Navigate [ ] Select [ENTER] Popup
RAID Mode :
Striping
Free Disks
Loc Disk Model Name
[ESC] Quit [F6] Back [F7] Finish [TAB] Navigate [ ] Select [ENTER] Popup
After assigning your RAID array disks, press <F7> to save your
changes of RAID array disks.
NVIDIA RAID Utility Jan 12 2005
- Define a New Array -
Stripimg Block :
Array Disks
Loc
[ ]Add
[ ]Del
NVIDIA RAID Utility Jan 12 2005
- Define a New Array -
Stripimg Block :
Array Disks
Loc
1.0.M Maxtor 6Y120M0
[ ]Add
1.1.M Maxtor 6Y120M0
[ ]Del
11
Optimal
8K
Disk Model
16K
32K
64K
128K
Optim
Optimal
Disk Model Name