ASROCK K7NF2-RAID Installation And Configuration Manual page 10

After you press <F10>, the NVIDIA RAID Utility - Define a New Array
window appears. By default, RAID Mode is set to Mirroring, but
please set it to Striping if you want to create RAID 0. And the
Striping Block is set to Optimal as default.
NVIDIA RAID Utility
RAID Mode :
Mirroring
Free Disks
Mirroring
Loc Disk
Striping
Stripe Mirroring
1.0.M Maxt
Spanning
1.1.M Maxt
[ESC] Quit [F6] Back [F7] Finish [TAB] Navigate [ ] Select [ENTER] Popup
Jan 12 2005
- Define a New Array -
Stripimg Block :
Array Disks
Loc Disk Model Name
[ ]Add
[ ]Del
10
Optimal