ASROCK K7NF2-RAID Installation And Configuration Manual page 14

After you press <F10>, the NVIDIA RAID Utility - Define a New Array
window appears. By default, RAID Mode is set to Mirroring, so you do
not need to change it when setting up RAID 1. And the Striping Block
is set to Optimal as default.
RAID Mode :
Mirroring
Free Disks
Mirroring
Loc Disk
Striping
Stripe Mirroring
1.0.M Maxt
Spanning
1.1.M Maxt
[ESC] Quit [F6] Back [F7] Finish [TAB] Navigate [ ] Select [ENTER] Popup
Then, for the following steps, please to refer to the detail description
in RAID 0. And you will see the below windows.
NVIDIA RAID Utility
RAID Mode :
Mirroring
Free Disks
Loc Disk Model Name
1.0.M Maxt 6Y120M0
1.1.M Maxt 6Y120M0
[ESC] Quit [F6] Back [F7] Finish [TAB] Navigate [ ] Select [ENTER] Popup
NVIDIA RAID Utility Jan 12 2005
- Define a New Array -
Stripimg Block :
Array Disks
Loc
[ ]Add
[ ]Del
Jan 12 2005
- Define a New Array -
Stripimg Block :
Array Disks
Loc
[ ]Add
[ ]Del
14
Optimal
Disk Model Name
Optimal
8K
Disk Model
16K
32K
64K
128K
Optim