Table of Contents
Advertisement
•
You can use the /r and /nr switches only with a silent install (such as with the "/s"
option).
Intel PROSet for Windows Device Manager Installation
This section describes how to install Intel PROSet for Windows Device Manager from
the command line.
NOTE: Intel PROSet can be installed with DxSetup.exe or msiexec.exe. Intel
recommends using DxSetup.exe. DxSetup.exe detects the system's language,
searches for the appropriate transform file, and applies it to MSI package. The
transform file translates the installation instructions to the language associated
with your operating system.
Using the DxSetup.exe Utility
DxSetup.exe is a setup utility used for installing Intel PROSet. It detects the system
language, searches for the appropriate transform file in the same folder, and then
launches PROSETDX.msi in the language specific to the operating system. The
transform file translates the installation instructions to the language associated with your
operating system.
Table 3-3
displays and describes DxSetup.exe switches, while
public properties.
Switch
/q[r|n]
/l[i|w|e|a]
Table 3-4. DxSetup.exe Public Properties
Switch
BD
Table 3-3. DxSetup.exe Switches
Description
Silent install options:
• r - Reduced GUI install
• n - Silent install
Log file options:
• i - Log status messages
• w - Log non-fatal warnings
• e - Log error messages
• a - Log the start of all actions
Description
Property settings are:
• 0 - Deselect / do not execute SetupBD
• 1 - Execute SetupBD to install the drivers (default setting)
NOTE: BD should only be set to 0 if the Base Drivers have already been
installed prior to running DxSetup.exe.
3-5
Chapter 3: Installing the Drivers
Table 3-4
describes its
Advertisement
Table of Contents
