Removing Intel Proset For Windows Device Manager; Receive Side Scaling; Rss Configuration; Teaming - Supermicro AOC-SG-i2 User Manual

High-performance, cost-effective dual-port gigabit ethernet card
Table of Contents

Advertisement

Removing Intel PROSet for Windows Device Manager

Use A
/R
DD
EMOVE PROGRAMS
Windows Device Manager.

Receive Side Scaling

RSS must be enabled for Intel® I/O Acceleration Technology to function. You must also
install Microsoft's Scalable Networking Pack (SNP) for RSS to function. Intel® PROSet
will not display the RSS setting if SNP is not installed.
NOTE: The Scalable Networking Pack is part of Microsoft Windows Server
2003 Service Pack 2. It is not part of Service Pack 1, therefore it requires a
separate download. See

RSS Configuration

RSS is enabled on the Advanced tab of the adapter property sheet. If your adapter does
not support RSS, or if the SNP is not installed, the RSS setting will not be displayed.

Teaming

Some RSS teaming considerations are as follows:
If RSS is not enabled for all adapters in a team, RSS will be disabled for the team.
If an adapter that does not support RSS is added to a team, RSS will be disabled for
the team.
If a non-Intel adapter is added to a team, RSS will be disabled for the team.
Non-Intel adapters with RSS enabled cannot be added to a team.
3-4
Installing the Base Driver and Intel® PROSet via
the Command Line

Installation Methods

The base driver install utility (SetupBD.exe) allows unattended install of base drivers
from a command line.
Intel® PROSet for Windows* Device Manager is supported on Microsoft* Windows*
2000, Windows XP, Windows Vista, and Microsoft Windows Server* 2003. Use
DxSetup.exe to Install PROSet for Windows Device Manager.
NOTE: Windows XP x64 and Windows Server 2003 x64 do not support
unattended driver installation.
from the C
P
ONTROL
ANEL
http://www.microsoft.com
3-3
Chapter 3: Installing the Drivers
to uninstall Intel PROSet for
for more information.

Advertisement

Table of Contents
loading

Table of Contents