Axis P1346 Installation Manual page 14

NOTE: Refer to the above image, note the distinct tone of the blue. Also the
crisp edges of the character sets, you can clearly see the blue on the white. It is
a bright white and deeper blue, not speckled or grainy or run together. That is the
sort of the image that the OCR engine passes to the DB engine with much
greater success.
LPRCONSOLE- IPCONFIGURE THICKCLIENT CONFIGURATION TOOL
LPRCalibrate.exe is a file that you need to run on the RLS box running LPR or on a
workstation/laptop that is allowed to run on the USPS 56. Network. Open the folder
"C:\Program Files\ipConfigure\LPRCalibrate" and double click on LPRCalibarate.exe, it
should start. Below is a screen shot we will use to describe the components. The goal
of this application is to properly tweak the camera settings after the FOV and initial setup
has been completed above. The goal is to use the information off this tool to go back
and tweak the camera settings if needed. As you click on the Start LPR button and start
to see what is being passed to the OCR engine and the DB tables, it will become clear if
you have a good image or bad image based on current camera settings, FOV, area of
Focus, etc.
QUICK TIP:
More than likely the cameras will already be installed on the RLS, click on the
button and choose the camera you want to work with. You will need to
click on the
selected. When your work is completed, click on the
– ipConfigure services on the RLS via the services,msc snap-in.
LPR Setup and Field Installation Guide
button to start working within the FOV of the camera you
ipConfigure ESM 5.1
and then restart the 2
14