Chapter 2 Installation; Package Contents; Safety Precautions - TP-Link JetStream TL-SL3428 Installation Manual

ChaCter 1 Installation
11C

Package Contents

Make sure that the package contains the following items. If any of the listed items is
damaged or missing, please contact your distributor.
111

Safety Precautions

To avoid any device damage and bodily injury caused by improper use, please observe
the following rules.
■
■
■
■
■
■
■
■
■
To ensure normal operation and long service life of the device, please install it in an
environment that meets the requirements described in the following subsection.
Temperature/Humidity
One Switch One Power Cord, one Console
Cable and one Ground Cable
One Resource CD Two mounting brackets and
the fittings
Safety Precautions
Keep the power off during the installation.
Wear an ESD-preventive wrist strap, and make sure that the wrist strap has a good
skin contact and is well grounded.
Use only the power cord provided with the Switch.
Make sure that the supply voltage matches the specifications indicated on the rear
panel of the Switch.
Ensure the vent hole is well ventilated and unblocked.
Do not open or remove the cover of the Switch.
Before cleaning the device, cut off the power supply. Do not clean it by the waterish
cloth, and never use any other liquid cleaning method.
Site Requirements
TL-SL3428
L2 Managed Switch
L2 Managed Switch
This Installation Guide
Installation
04