Table of Contents
Advertisement
Load Balance Broadband Router
Note: These tools are not provided with our product. If needed, please self purchase
them.
112
Product Installation
Desktop Installation
■
To install the device on the desktop, please follow the steps:
1.
Set the device on a flat surface strong enough to support the entire weight of the
device with all fittings.
2.
Remove the adhesive backing papers from the rubber feet.
3.
Turnover the device and attach the supplied rubber feet to the recessed areas on
the bottom at each corner of the device.
Rack Installation
■
To install the device in an EIA standard-sized, 19-inch rack, follow the instructions
described below:
1.
Check the grounding and stability of the rack.
2.
Secure the supplied rack-mounting brackets to each side of the device with supplied
screws, as illustrated in the following figure.
Installation
06
Figure 2-1
Desktop Installation
Figure 2-2
Bracket Installation
Feet
Bottom of the Device
Notch
Rackmounting Bracket
Screw
Advertisement
Table of Contents
