Reset Button; Power Button - Supermicro Supero X8DAH+-F User Manual

X8DAH+/X8DAH+-F/X8DAH+(-F)-LR User's Manual

Reset Button

The Reset Button connection is located
on pins 3 and 4 of JF1. Attach it to a
hardware reset switch on the computer
case. Refer to the table on the right for
pin definitions.

Power Button

The Power Button connection is located
on pins 1 and 2 of JF1. Momentarily con-
tacting both pins will power on/off the sys-
tem. This button can also be configured
to function as a suspend button (with a
setting in the BIOS - see Chapter 4). To
turn off the power when set to suspend
mode, press the button for at least 4
seconds. Refer to the table on the right
for pin definitions.
OH/Fan Fail LED
X8DAH+
Rev. 2.01
PWR Fail LED
2-24
Reset Button
Pin Definitions (JF1)
Pin# Definition
3 Reset
4 Ground
Power Button
Pin Definitions (JF1)
Pin# Definition
1 Signal
2 +3V Standby
A. Reset Button
B. PWR Button
20 19
Ground
X
Power LED
HDD LED
NIC1 LED
NIC2 LED
Ground
Ground
2 1
NMI
X
Vcc
Vcc
Vcc
Vcc
Vcc
Vcc
A
Reset
Reset Button
B
Power Button
PWR