Adjusting Your Monitor Image; Using The Direct Access Controls; Using The On-Screen Display (Osd) Controls - Lenovo LS1922 User Manual

Adjusting your monitor image

This section describes the user control features for adjusting your monitor image.

Using the direct access controls

The direct access controls can be used when the On Screen Display (OSD) is not
displayed.
Table 2-1. Direct access controls
Icon

Using the On-Screen Display (OSD) controls

To adiust the settings, the user controls can be viewed through the OSD.
To use the controls:
1.
2.
3.
4.
.
5
Control
Image Setup
Brightness
Press to open the main OSD menu.
Use or to move among the icons. Select an icon and press
function. If there is a sub-menu, you can move between options using
then press to select that function. Use
save.
Press to move backwards through the sub-menus and exit from the OSD.
Press and hold for 10 seconds to lock the OSD. This will prevent accidental
adjustments to the OSD. Press and hold
allow adjustments to the OSD.
Enables DDC/CI by default. Use OSD Exit Key,Press and hold the
10 seconds to disable / enable DDC/CI function. The words " DDC/CI disable" shows
on the screen.
Description
Activates automatic image adjustment.
Direct access to Brightness adjustment.
or to make adjustments. Press
for 10 seconds to unlock the OSD and
to access that
or ,
to
buttons for
2-3
Chapter 2.