Installing The Monitor Driver In Windows Vista - Lenovo LS1922 User Manual

Installing the monitor driver in Windows Vista

To use the Plug and Play feature in Windows Vista, files should be loaded from the
Reference and Driver CD.
Note: This section must be completed before continuing with the Windows Vista
automatic image setup.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10. Open the Hardware Update Wizard window by clicking on Update Driver, and
11. Select Install from a list or Specific location(Advanced), and then click Next.
12. Select "Don't search. I will choose the driver to install" option, and then click
13. Click the Have Disk button. Click on the Browse button and navigate to
14. Select the "lenls1922wa.inf" file and click the Open button. Click the OK button.
15. Select LEN LS1922wA and click Next. The files will be copied from the CD to
16. Close all open windows and remove the CD.
17. Restart the system. The system will automatically select the maximum refresh
Note: On LCD monitors, unlike CRTs, a faster refresh rate does not improve display
quality. Lenovo recommends using either 1366 x 768 at a refresh rate of 60 Hz, or 640
x 480 at a refresh rate of 60 Hz.
3-6
LS1922 Wide Flat Panel Monitor User's Guide
Turn off the computer and all attached devices.
Ensure that the monitor is connected correctly.
Turn on the monitor and then the system unit. Allow the system to boot into
Windows Vista.
Open the Display Properties window by clicking Start J Settings J Control
Panel, and then double-clicking the Display icon.
Click the Settings tab.
Click the Advanced button.
Click the Monitor tab.
Click the Properties button.
Click the Drivers tab.
then click Next.
Next.
the following directory:
X:\Monitor Drivers\Windows Vista
(where X is the drive letter designator for the CD-ROM drive).
your hard disk drive.
rate and corresponding Color Matching Profiles.