Installing The Display Assembly - Dell Latitude E5430 Owner's Manual
Dell - 14" latitude notebook - 4 gb memory - 500 gb hard drive
Hide thumbs
Also See for Latitude E5430:
- Owner's manual (79 pages) ,
- Setup and features information (9 pages) ,
- How-to manual (46 pages)
Table of Contents
Advertisement
5.
Pull the antennas through the opening to the top of the computer.
6.
Remove the screws that secure the display assembly in place.
7.
Remove the display assembly from the computer.
Installing the Display Assembly
1.
Install the screws that secures the display assembly in place.
2.
Insert the low-voltage differential signaling (LVDS) cable and wireless antennae cables through the holes on the
chassis.
3.
Route the LVDS cable along its compartment and connect the connector to the system board.
4.
Connect the antenna cables to their connectors.
5.
Install:
a) palmrest
b) right base panel
c) hard drive
32
- Quick Links:
- Specifications
- Diagnostics
Hide quick links:
Advertisement
Table of Contents
