Kenwood KDC-BT752HD Instruction Manual page 33

Symptom
"TOC ERROR" appears.
"ERROR 99" appears.
"COPY PRO" appears.
"READ ERROR" appears.
"NO DEVICE" appears.
"NO MUSIC" appears.
"NA DEVICE" appears.
"iPod ERROR" appears.
"iPod FULL" appears.
Noise is generated.
Tracks cannot play back as you have intended
them to play.
"READING" keeps flashing.
Elapsed playing time is not correct.
The number of songs contained in "SONGS"
category of this unit is different from that
contained in "SONGS" category of iPod.
Correct characters are not displayed (e.g.
album name).
Pandora
Symptom
"PANDORA ERR 5" appears.
"NO SKIPS" appears.
"CHECK DEVICE" appears.
Bluetooth
Symptom
The hands-free talk volume is low.
No beep is heard at reception of an incoming
call.
The CD is quite dirty. / The CD is upside-down. / The CD is scratched a lot. Try another
disc instead.
The unit is malfunctioning for some reason. Press the reset button on the unit. If the
"ERROR 99" code does not disappear, consult your nearest service center.
A copy-protected file is played.
Copy the files and folders for the USB device again. If the error message is still
displayed, initialize the USB device or use other USB devices.
No USB device is connected. Connect a USB device, and change the source to USB
again.
The connected USB device contains no playable audio file.
Connect a supported USB device, and check the connections.
Reconnect the iPod. / Confirm that the software for the iPod is the latest version. /
Reset the iPod.
The iPod memory is full.
Skip to another track or change the disc.
Playback order is determined when files are recorded.
Longer readout time is required. Do not use too many hierarchies and folders.
This is caused by how the tracks are recorded.
Podcast files are not counted in this unit as this unit does not support the playback of
podcast files.
This unit can only display letters (upper case), numbers, and a limited number of
symbols.
Thumb up/down operation has failed.
The skip count limit has been exceeded.
Check the Pandora® application on the iPhone/iPod touch.
The hands-free talk volume can be adjusted independently. Adjust it during hands-
free talk. [MIC GAIN], [NR LEVEL] and [EC LEVEL] of <Bluetooth Setup> (page
23).
No beep is heard depending on the type of your cell-phone. The [CALL BEEP] of
<Bluetooth Setup> (page 23) is set ON.
Remedy/Cause
Remedy/Cause
Remedy/Cause
Continued to next page
33
English