Bluetooth Setup - Kenwood KDC-BT752HD Instruction Manual

displayed.
When "(device name)" is displayed, select
■ ■
"[NEW DEVICE]" and press the control
knob.
When "DEVICE FULL" is displayed, delete a
■ ■
Bluetooth device and retry.
1. Turn the volume knob to select the
Bluetooth device, then press and hold
to confirm.
2. Turn the volume knob to select "YES",
then press to confirm.
Turn the volume knob to select a
2
Bluetooth device name, press and hold
to confirm.
"BT TEST MODE" is displayed.
"CONFIRM DVC" is displayed.
3
If "PAIRING OK" is displayed, proceed to
step 6.
If "PIN CODE" is displayed, proceed to steps
4.
If "*** NG" is displayed, press the volume
knob. Proceed to steps 3.
Input the PIN code
4
Turn the volume knob to select the
■ ■
number.
To move to the next digit, press ¢.
■ ■
Item
PAIRING
DEVICE SEARCH Registers a Bluetooth device (pairing). (For details, see page 22.)
PHONE SELECT Selects a cell-phone connection. (For details, see page 22.)
AUDIO SELECT
Selects a Bluetooth audio player connection. (For details, see page 22.)
S-DVC SELECT
(For details, see page 22.)
DEVICE DELETE Cancel registration of the Bluetooth device.
1. Turn the volume knob to select the Bluetooth device, then press to confirm.
2. Turn the volume knob to select "YES", then press to confirm.
DETAILED SET
PIN CODE EDIT
Specify the PIN code required when registering this unit using the Bluetooth device. By default, "0000" is
specified.
1. Turn the volume knob to select the number.
■ ■
■ ■
2. Press the volume knob to register a PIN code
AUTO ANSWER OFF: Does not answer the phone call automatically. ; 0: Automatically answers the phone call at once. ;
1 – 8 * –99: Automatically answers the phone call after lapse of 1 – 99 seconds.
To move to the next digit, press ¢.
To delete the last digit, press 4.
To delete the last digit, press 4.
■ ■
Press the volume knob to transmit the
5
PIN code.
The connection result, "OK" or "NG", is
6
displayed.
"PAIRING": Registration to this unit
■ ■
"HF CONNECT": Hands-free phoning
■ ■
"AUD CNT": Audio playback
■ ■
"PB DL": Phone Book downloading
■ ■
Press
7
Data (Phone Book, etc.) of the cell-phone
■ ■
checked for connection does not remain in
this unit.

Bluetooth Setup

Press
1
Turn the volume knob to select
2
[SETTINGS], then press to enter.
Turn the volume knob to make a
3
selection, then press to confirm.
See table below for selection.
■ ■
Repeat step 3 until the desired item is
■ ■
selected/activated.
Press
■ ■
Hold
4
To cancel the Bluetooth mode, press
■ ■
Selectable setting (Preset: *)
to exit pairing mode.
to enter Bluetooth mode.
to return to the previous item.
to finish the procedure.
Continued to next page
.
23
English