Marantz SR6007 Owner's Manual page 135

Settings
Make settings for wired LAN.
Only set "Settings" when connecting to a network without a DHCP function.
Network
Information
IP Control
Friendly Name
q
Settings
Maintenance Mode
Selects how configure the network settings
q On the menu, select "Network" – "Settings" and press
ui ENTER
w Use to select "DHCP", then press
o p ENTER
e Use to select "Off", then press
ui
r Use to select "IP Address", then press
• IP Address : Set the IP address within the ranges shown below.
The Network Audio function cannot be used if other IP addresses are set.
CLASS A: 10.0.0.1 – 10.255.255.254
CLASS B: 172.16.0.1 – 172.31.255.254
CLASS C: 192.168.0.1 – 192.168.255.254
uio p
t Use to input the address and press
ui
y Use to select the setting item, then press
• Subnet Mask : When connecting an xDSL modem or terminal adapter
directly to this unit, input the subnet mask indicated in the documentation
supplied by your provider. Normally input 255.255.255.0.
• Default Gateway : When connected to a gateway (router), input its IP
address.
• Primary DNS, Secondary DNS : If there is only one DNS address indicated in the documentation
supplied by your provider, input it at "Primary DNS". If two or more DNS are provided by your
provider, enter both "Primary DNS" and "Secondary DNS".
o
BACK
u Press or .
The display returns to the original screen.
• When connecting to the network via a Proxy server, select "Proxy" and press
"Proxy settings").
DVD
Default settings are underlined.
Setting details
e
Network/Settings
w
DHCP Off
IP Address 192.168.000.001
Subnet Mask 255.255.255.000
r
Default Gateway 255.255.255.000
Primary DNS 000.000.000.000
Secondary DNS 000.000.000.000
Proxy
Configure the network settings manually
ENTER
.
.
.
ENTER
.
ENTER
.
ENTER
.
ENTER
• If you are using a broadband router (DHCP function), there is no need to make the settings at "IP
Address" and "Proxy", since the DHCP function is set to "On" in this unit's default settings.
• If this unit is being used connected to a network without the DHCP function, the network settings
must be made. In this case, some knowledge of networks is required. For details, consult a network
administrator.
• If you cannot connect to the Internet, recheck the connections and settings (vpage 26).
t
• If you do not understand about Internet connection, contact your ISP (Internet Service Provider) or the
store from which you purchased your computer.
y • When you want to cancel the setting during IP address input, press
(vpage 133
132
Setting details
o BACK
or .
v See overleaf
Network