Network - Marantz SR6007 Owner's Manual

Network

To use this unit by connecting it to a home network (LAN), you must configure network settings.
If you set up your home network (LAN) via DHCP, set "DHCP" to "On" (use the default setting). This
allows this unit to use your home network (LAN).
If you assign an IP address for each device, you must use the "IP Address" setting to assign an IP
address to this unit and enter the information about your home network (LAN) such as the gateway
address and subnet mask.
Menu operation
1
Press MAIN to switch the zone mode to the MAIN ZONE.
MAIN
lights.
2
Press SETUP .
The menu is displayed on the TV screen.
3
ui
Use to select the menu to be set or operated.
4
Press ENTER or p to enter the setting.
o
• To return to the previous item, press or
SETUP
• Exiting the Menu, press while the menu is displayed.
The menu display disappears.
DVD
BACK
.
Items that can be set with the "Network" procedure
Information (vpage 131)
IP Control (vpage 131)
Friendly Name (vpage 131)
Settings (vpage 132)
Maintenance Mode (vpage 133)
130