Installing Batteries - Insignia NS-R2001 User Manual

Am/fm stereo receiver

Hide thumbs Also See for NS-R2001:

Guide utilisateur (20 pages)

User manual (20 pages)

Guía del usuario (20 pages)

Table Of Contents

Table of Contents

Insignia NS-R2001 AM/FM Stereo Receiver

Connecting speakers

Right

Caution

It is recommended to use speakers with an

impedance of 8 Ohms or more if using only the

SPEAKER A or SPEAKER B terminals. Use speakers

with an impedance over 16 Ohms or more if using

both the SPEAKER A or SPEAKER B terminals.

Do not let the bare speaker wires touch each other or

any metal part of this receiver. Doing so may damage

the receiver or speaker.

To connect your speakers:

1 Turn the terminal cap to loosen it.

2 Insert the bare wire into the terminal fully and

tighten the terminal cap to securely connect it.

Make sure that you strip the wire adequately so

that none of the wire insulation is under the

terminal.

3 Make sure it is fastened firmly by pulling the

cable lightly.

Notes

If you have only one pair of speakers, connect them

to the SPEAKER A terminals.

Be sure to connect the speakers correctly,

according to the channel (left and right) and the

polarity (+ and -). If you do not make the

connections correctly, you will not hear any

sounds from the speakers.

If the sound is unnatural and lacks bass, the

speaker polarity is incorrect.

Speaker A

Left

Speaker B

www.insigniaproducts.com

Connecting headphones

To connect your headphones:

1 Insert a 1/4" headphone plug into the

headphone jack on the receiver.

2 Press the SPEAKER A or SPEAKER B button on

the remote to turn the corresponding speakers

off. The corresponding speaker indicator turns

off, H appears on the display, and sound can be

heard from the headphones.

Connecting the power

To connect your receiver to power:

• Plug the power cord into an AC outlet.