Hitachi CP-WX3014WN Operating Manual page 60

( )
(continued on next page)
(6) The current name will be displayed on
the first line. Use the ▲/▼/◄/► buttons
and the
select and enter characters. To erase 1
character at one time, press the
button or press the ◄ and
at the same time. Also if you move the
cursor to DELETE or ALL CLEAR on
screen and press the
button, 1 character or all characters will
be erased. The name can be a maximum
of 16 characters.
(7) To change an already inserted character,
press the ▲ button to move the cursor to
the first line, and use the ◄/► buttons to
move the cursor on the character to be
changed.
After pressing the
selected. Then, follow the same procedure as described at the
item (6) above.
(8) To finish entering text, move the cursor to the OK on screen and
press the ►,
name without saving changes, move the cursor to the CANCEL
on screen and press the ◄,
Using the ▲/▼ cursor buttons switches the mode for the template
screen.
Press the ► cursor (or the
template, and press the ◄ cursor button to close the displayed
screen.
The last selected template is displayed when the
allocated to the TEMPLATE function is pressed (
TEST PATTERN
MAP2 MAP1
You can turn a map upside down and scroll it horizontally when
MAP1 or MAP2 is selected. To invert or scroll the map, display
the guidance by pressing the
seconds or more when MAP1 or MAP2 appears.
or button to
button
or
or
or button. To revert to the previous
) button to display the selected
DOT-LINE1 DOT-LINE2
CIRCLE2
button on the remote three
SCREEN menu
button, the character is
or button.
57).
DOT-LINE3
CIRCLE1 DOT-LINE4
51