Hitachi CP-WX3014WN Operating Manual page 22

Connecting with your devices (continued)
• The
NOTE
width Digital Content Protection) and therefore capable of displaying a video
signal from HDCP compatible DVD players or the like.
- The supports the following signals.
Video signal : 480i@60, 480p@60, 576i@50, 576p@50, 720p@50/60,
1080i@50/60, 1080p@50/60
Audio signal : Format Linear PCM
Sampling frequency 48kHz / 44.1kHz / 32kHz
- This projector can be connected with another equipment that has HDMI
connector, but with some equipment the projector may not work properly,
something like no video.
- Be sure to use an HDMI
- Use a Category 2-certified HDMI
projector.
- When the projector is connected with a device having DVI connector, use a
TM
DVI to HDMI
(continued on next page)
39)
(
45)
(
port of this model is compatible with HDCP (High-band-
TM
cable that has the HDMI
cable to connect with the
40)
(
(
38)
(
TM
cable to input 1080p@50/60 signal to the
input.
Setting up
40)
(
39)
TM
logo.
TM
13