Network Menu - Panasonic PT-LB3U Operating Instructions Manual

Menu operation (continued)
▌ CONTROL DEVICE SETUP
You can enable/disable the button operations of the
control panel and remote control.
Change
Change setting
setting
CONTROL PANEL
ENABLE Enable the button operations
DISABLE Disable the button operations
REMOTE CONTROLLER
ENABLE Enable the button operations
DISABLE Disable the button operations
NOTE:
• If DISABLE is selected and [ENTER] is pressed, the
confirmation screen appears. Select OK and press
[ENTER].
• If any button is pressed after
to DISABLE, the password screen appears. Input the
password which is set in the SECURITY menu. (If no
operation is done, the password screen disappears in 10
seconds.)
• If you set both CONTROL PANEL and REMOTE
CONTROLLER to DISABLE, all buttons' operations of
the control panel and remote control are disabled and you
cannot turn off the power.
How to clear DISABLE:
During the standby mode or projection, press and
hold [ENTER] and [MENU] for at least 2 seconds, and
CONTROL PANEL is set to ENABLE.
Change the setting of REMOTE CONTROLLER with the
control panel.
42  ENGLISH
Change
Change setting
setting
CONTROL PANEL is set

NETWORK MENU

Remote control
MENU MENU
RETURN
MENU MENU RETURN
ENTER ENTER
ENTER ENTER
AV
AV
MUTE
FREEZE
FREEZE MUTE
COMPUTER VIDEO
COMPUTER
VIDEO
DEFAULT DEFAULT FUNCTION INDEX-
DEFAULT FUNCTION DEFAULT WIN.
INDEX-
WIN.
Set the selected item with [  ].
NOTE:
• These items are set for network connection with a
computer. For details of the PJ Link and network, see
"Network Operation Manual".
WIRED LAN
You can set up a wired LAN.
NAME CHANGE
You can change the name of the projector.
NETWORK CONTROL
When controlling the projector with a computer on the
network, you must turn this function ON.
STATUS
You can display the status of the network setting.
INITIALIZE
You can reset the settings of the network to the factory
default settings.
NOTE:
• If PASSWORD (SECURITY menu) is activated, when the
network setting is initialized, you will be required to input the
password.
Control panel
INPUT
INPUT
SELECT
SELECT
STANDBY
STANDBY
(R)
(R)
ON(G)
ON(G)
ENTER ENTER
ENTER ENTER
LAMP
LAMP
TEMP
TEMP
MENU MENU FUNCTION
MENU MENU FUNCTION