Selecting An Input Signal - Hitachi CP-WX2515WN User Manual

Operating

Selecting an input signal

Press INPUT button on the projector.
1.
Each time you press the button, the projector switches its
input port from the current port as below.
COMPUTER IN1
VIDEO
S-VIDEO
● While ON is selected for AUTO SEARCH item in OPTION menu (
projector will keep checking the ports in above order repeatedly till an input
signal is detected.
● It may take several seconds to project the images from the USB TYPE B port.
Press COMPUTER button on the remote control.
1.
Each time you press the button, the projector switches its
input port from the current port as below.
COMPUTER IN1
USB TYPE B
● While ON is selected for AUTO SEARCH item in OPTION menu, the
projector will keep checking every port sequentially till an input signal is detected
56). If COMPUTER button is pressed when VIDEO, S-VIDEO or HDMI port is
(
selected, the projector will check COMPUTER IN1 port fi rst.
● It may take several seconds to project the images from the USB TYPE B port.
Press VIDEO button on the remote control.
1.
Each time you press the button, the projector switches its
input port from the current port as below.
HDMI
● While ON is selected for AUTO SEARCH item in OPTION menu,
the projector will keep checking every port sequentially till an input signal
is detected (
COMPUTER IN2, LAN, USB TYPE A or USB TYPE B port is selected, the
projector will check HDMI port fi rst.
24
COMPUTER IN2
HDMI
COMPUTER IN2
USB TYPE A
S-VIDEO VIDEO
56). If VIDEO button is pressed when COMPUTER IN1,
LAN
USB TYPE A
USB TYPE B
COMPUTER button
LAN
INPUT
button
56), the
VIDEO COMPUTER MY SOURCE/
DOC.CAMERA
ASPECT AUTO SEARCH BLANK
FREEZE
MAGNIFY PAGE VOLUME
UP
ON
DOWN
OFF
MY BUTTON
KEYSTONE MUTE
VIDEO button
VIDEO COMPUTER MY SOURCE/
DOC.CAMERA
ASPECT AUTO SEARCH BLANK
MAGNIFY FREEZE PAGE VOLUME
UP
ON
OFF DOWN
MY BUTTON
KEYSTONE MUTE