16 www.electrolux.com
7.4 Ventilation requirements
6 cm
7.5 Installing the appliance
CAUTION!
Make sure that the mains cable
can move freely.
min.
200 cm
2
x
The airflow behind the appliance must be
sufficient.
min.
200 cm
2
Do these steps.
x
• Loosen and remove the lower
pin.
On the opposite side:
• Tighten the lower pin.
• Install the lower door.
• Tighten the middle hinge.
• Install the spacer.
• Install the upper door.
• Tighten the upper pin.
If necessary cut the ad-
hesive sealing strip and
then apply it to the appli-
ance as shown in figure.