Detach And Reattach A Usb Drive - HP X510 - StorageWorks Data Vault User Manual

3. Follow instructions to
Connect an eSATA Disk Drive or SATA Port Multiplier
1. Plug the eSATA cable into the eSATA port on the back of the server, as shown in the following
figure.
2. To plug in and turn on your eSATA disk drive or SATA port multiplier, see the documentation
that came with your device.
3. Follow instructions to

Detach and Reattach a USB Drive

In this article...
Detach a USB Drive from the Server
Reattach a USB Drive to the Server
Add and Remove Drives from Server
Add and Remove Drives from Server
Server Storage
Storage.
Storage.
225