HP X510 - StorageWorks Data Vault User Manual page 53

Update Client PCs
There are multiple ways of updating your client PCs. Once the server is updated, the client PC
software update file is on the server and can be run from the software folder. The client PC update
can also be downloaded and run from HP Update. The following sections describe various
methods for installing the client PC update. Click an option to expand and view the instructions
for updating your client. Click again to hide the instructions.
•
To Update Client PCs Using Run Programs
1. At the computer, click Start, and then Run.
Type the following (UNC) network address.
\\hpstorage\Software\Home Server Connector Software\setup.exe
If you renamed your server during the initial software installation the path will be \\<server
name>\Software\Home Server Connector Software\setup.exe.
2. Follow the instructions on your computer for installing the update.
•
To Update Client PCs Using HP Update
1. Click the Start menu, HP, and HP Update.
2. Click Settings to configure HP Update.
3. Click Next to immediately check for a client PC update.
4. Follow the instructions on your computer for installing the update.
•
To Update Client PCs Using the Software Installation Disc
The Software Installation Disc runs an executable file that is on your server. When the server
software is updated, the new client executable file is placed on the server but not installed. As
long as you run the Software Installation Disc after you update the server, the CD will find the
new client executable file on the server and install it.
•
To Update Client PCs Using a Browser
1. Open a Web Browser and type the following address http://hpstorage:55000.
If you renamed your server during the initial installation the URL will be http://<server
name>:55000.
The Windows Home Server Connector Setup window opens.
2. Click Download Now.
Set up and Installation
47