Table of Contents
Advertisement
Top cover
NOTE:
The top cover spare part kit includes the TouchPad but not the TouchPad cables. The
TouchPad cables are included with the TouchPad button board. For more information about the
TouchPad button board, see
Description
Top cover for use with Compaq models
Top cover for use with black HP models
Top cover for use with blue HP models
Before removing the top cover, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
●
Memory module/wireless module compartment cover (see
●
Hard drive (see
●
Keyboard (see
NOTE:
When replacing the top cover, be sure that the following components are removed from the
defective top cover and installed on the replacement top cover:
●
Power button board and cable (see
●
TouchPad button board and cables (see
To remove the top cover:
1.
Close the computer, and then turn the computer upside down with the front toward you.
TouchPad button board on page
Battery on page
32), and then remove the following components:
Hard drive on page
46)
Keyboard on page
51)
Power button board on page
TouchPad button board on page
61.
Spare part number
689696-001
689695-001
689694-001
WLAN module on page
59)
61)
Component replacement procedures
41)
55
Advertisement
Table of Contents
