System Board Switches - HP Vectra XM 5/xxx - 3 Manual

2 PC Hardware Structure

System Board Switches

System Board Switches
The PC has one system board switch block to configure the PC.
Switch: Function:
1 - FLASH Enable or prevent system ROM updates using the HPROMInit utility:
• OFF to enable system updates — DEFAULT
• ON to disable system updates.
2 - SECURE Enable or prevent changes to the system configuration with the SETUP program:
• OFF to enable changes to the configuration — DEFAULT
• ON to prevent changes to the configuration.
3 - CONFG Retain or clear the configuration stored in EEPROM:
• OFF to retain configuration — DEFAULT
• ON to clear configuration.
4 - PSWRD Enable or clear (and disable) User and System Administrator Passwords stored in
EEPROM:
• OFF to enable passwords — DEFAULT
• ON to clear passwords.
5 - PARIT Enable or disable parity for the main memory modules:
• OFF to disable parity for the main memory modules — DEFAULT
• ON to enable parity for the main memory modules.
6 - PROCESSOR CAUTION: THE SELECTED SPEED MUST CORRESPOND WITH THE SPEED OF
THE INSTALLED PROCESSOR.
• OFF to select 75 MHz, 90 MHz, and 100 MHz
• ON to select 120 MHz.
7 - RESERVED Always OFF (not used)
8 - RESERVED Always OFF (not used)
16