HP Vectra XM 5/xxx - 3 Manual page 30

3 Troubleshooting and Repair
Using SETUP to Configure the PC
Field Name Purpose
Parallel Port
Parallel Port Mode
Serial Port A
Serial Port B
Remote Start Enable or Disable the Remote Start
feature
Network Protocol Select which protocol will be used for
Remote Start.
PCI Integrated Enable or Disable the integrated Ethernet
Ethernet Interface interface
MAC Address View the MAC address (if the Ethernet
interface is enabled)
Video Select which video adapter mode is used
Primary Adapter by the integrated video controller.
Video Enables or disables the copying of the
BIOS Shadowing video BIOS on ISA video boards into RAM.
VGA Enhanced/ Select ergonomic refresh rates.
Ergonomic Modes
26
Options Remarks
Select a Disable the parallel
combination of I/O port to resolve an
address and IRQ address conflict,
channel. prevent access to
your system, or free
an IRQ or I/O
resource.
Centronics, ECP,
EPP 1.7, or
EPP 1.9
Select a Disable a serial port
combination of I/O to resolve an
address and IRQ address conflict,
channel. prevent access to
your system, or free
an IRQ or I/O
resource.
None/Ethernet
None/Novell/
Microsoft
Enabled/Disabled
EGA/VGA or
similar,
Monochrome,
CGA/Multimode
80, CGA/
Multimode 40
Enabled/Disabled
Different refresh
rates may be
selected for
different screen
resolutions.