Download
Share
Print this page
Intel Vectra VEi7 Installation Manual
  1. Manuals
  2. Brands
  3. Intel Manuals
  4. Adapter
  5. Vectra VEi7
  6. Installation manual

Intel Vectra VEi7 Installation Manual

Hp vectra vei7, intel etherexpress pro 10+ isa ethernet adapter, installation guide
Hide thumbs Also See for Vectra VEi7:

Advertisement

Quick Links

Download this manual
Intel EtherExpress PRO 10+ ISA
Ethernet Adapter
Installation Guide

Advertisement

loading
Need help?

Need help?

Do you have a question about the Vectra VEi7 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Intel Vectra VEi7

Summary of Contents for Intel Vectra VEi7

  • Page 1 Intel EtherExpress PRO 10+ ISA Ethernet Adapter Installation Guide...
  • Page 2 Hewlett-Packard shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.
  • Page 3 General information to read before installing General information to read before installing On all systems: efore installing LAN card, go into Bios setup and set PnP OS option field to NO. • How to change LAN card configuration if needed (Advanced users only) This is a general advisory on how to forcibly modify resources for ISA and PCI network cards.
  • Page 4 3 Set PNP OS to NO and reserve IRQ 5. 4 Save settings and boot to applicable OS. 5 Remote boot: 6 Remote boot fails HP tests on Vectra VEi7. 7 Message during boot on VEi8: 8 Message “EtherExpress PRO flash routines disabled. ROM shadowing problem.”...
  • Page 5 General information to read before installing 9 From main menu go to Change adapter configuration > Change “Flash Memory” to Disabled.
  • Page 6 • Microsoft Windows NT 3.51 Server system that supports NetBEUI, NWLink IPX/SPX Compatible Transport, and NWLink NetBIOS network protocols. Device Configuration Device Configuration Vectra Vli8 Vectra VEi7 Vectra VEi8 Interrupt I/O Address Procedure 1 With the HP Vectra turned off, install the Intel EtherExpress PRO 10+ ISA adapter card into an ISA slot.
  • Page 7 1 Installing the Intel EtherExpress PRO 10+ ISA Ethernet Adapter Connecting to a Windows NT 3.51 Server 8 Windows 95SR2.5 will automatically recognize the Intel ethernet card as “Intel EtherExpress PRO/10 (PnP Enabled)”. 9 Insert the “PRO/10+ ISA LAN Adapter Configuration and Driver Diskette” in the floppy drive and click on “Next”...
  • Page 8 • Microsoft Windows NT 4.0 Server system that supports NetBEUI, NWLink IPX/SPX Compatible Transport, and NWLink NetBIOS network protocols. Device Configuration Device Configuration Vectra Vli8 Vectra VEi7 Vectra VEi8 Interrupt I/O Address Procedure 1 With the HP Vectra turned off, install the Intel EtherExpress PRO 10+ ISA adapter card into an ISA slot.
  • Page 9 2 Installing the Intel EtherExpress PRO 10+ ISA Ethernet Adapter Connecting to a Windows NT 4.0 Server 9 Insert the “PRO/10+ ISA LAN Adapter Configuration and Driver Diskette” in the floppy drive and click on “Next” from the Update Device Driver Wizard dialog box.
  • Page 10 • Novell NetWare 3.12 Server system that supports IPX network protocol. • Novell Client for Windows 95 v2.5 installation media. Device Configuration Device Configuration Vectra Vli8 Vectra VEi7 Vectra VEi8 Interrupt I/O Address Procedure 1 With the HP Vectra turned off, install the Intel EtherExpress PRO 10+ ISA adapter card into an ISA slot.
  • Page 11 3 Installing the Intel EtherExpress PRO 10+ ISA Ethernet Adapter Connecting to a Novell Netware 3.12 Server 9 Insert the “PRO/10+ ISA LAN Adapter Configuration and Driver Diskette” in the floppy drive and click on “Next” from the Update Device Driver Wizard dialog box.
  • Page 12 • Novell NetWare 4.11 Server system that supports IPX network protocol. • Novell Client for Windows 95 v2.5 installation media. Device Configuration Device Configuration Vectra Vli8 Vectra VEi7 Vectra VEi8 Interrupt I/O Address Procedure 1 With the HP Vectra turned off, install the Intel EtherExpress PRO 10+ ISA adapter card into an ISA slot.
  • Page 13 4 Installing the Intel EtherExpress PRO 10+ ISA Ethernet Adapter Connecting to a Novell Netware 4.11 Server 9 Click on “Next” to continue installation then insert the Intel EtherExpress drivers disk. 10 Click on “Other Locations…”, set the path to “A:\” and click on “Finish”. 11 When prompted for the file”EPRONDI.DLL”...
  • Page 14 • Microsoft Windows NT 3.51 Server system that supports NetBEUI, NWLink IPX/SPX Compatible Transport, and NWLink NetBIOS network protocols. Device Configuration Device Configuration Vectra Vli8 Vectra VEi7 Vectra VEi8 Interrupt I/O Address Procedure 1 With the HP Vectra turned off, install the Intel EtherExpress PRO 10+ ISA adapter card into an ISA slot.
  • Page 15 26 Select “Yes” at the prompt to shut down and restart your computer for the new settings to take effect. 27 Install the Windows NT4 Service Pack 4 application to correct the error messages in the Event Viewer. 28 Install the Hewlett-Packard Soft-Power Down application once the Service Pack 4 has been installed.
  • Page 16 • Microsoft Windows NT 4.0 Server system that supports NetBEUI, NWLink IPX/SPX Compatible Transport, and NWLink NetBIOS network protocols. Device Configuration Device Configuration Vectra Vli8 Vectra VEi7 Vectra VEi8 Interrupt I/O Address Procedure 1 With the HP Vectra turned off, install the Intel EtherExpress PRO 10+ ISA adapter card into an ISA slot.
  • Page 17 26 Select “Yes” at the prompt to shut down and restart your computer for the new settings to take effect. 27 Install the Windows NT4 Service Pack 4 application to correct the error messages in the Event Viewer. 28 Install the Hewlett-Packard Soft-Power Down application once the Service Pack 4 has been installed.
  • Page 18 • Novell NetWare 3.12 Server system that supports IPX network protocol. • Novell IntranetWare Client for Windows NT v4.11b installation media. Device Configuration Device Configuration Vectra Vli8 Vectra VEi7 Vectra VEi8 Interrupt I/O Address Procedure 1 With the HP Vectra turned off, install the Intel EtherExpress PRO 10+ ISA adapter card into an ISA slot.
  • Page 19 7 Installing the Intel EtherExpress PRO 10+ ISA Ethernet Adapter Connecting to a Novell NetWare 3.12 Server 8 Log onto Windows NT4 Workstation with administrator privileges (Contact your network administrator if you do not have the required information). 9 Right-click on the “Network Neighborhood” icon and select “Properties”. 10 Click on “Yes”...
  • Page 20 33 Click on the “Login” tab and specify your Name and Password to login. 34 Install the Windows NT4 Service Pack 4 application to correct the error messages in the Event Viewer. 35 Install the Hewlett-Packard Soft Power Down application once the Service Pack 4 has been installed.
  • Page 21 • Novell NetWare 4.11 Server system that supports IPX network protocol. • Novell IntranetWare Client for Windows NT v4.11b installation media. Device Configuration Device Configuration Vectra Vli8 Vectra VEi7 Vectra VEi8 Interrupt I/O Address Procedure 1 With the HP Vectra turned off, install the Intel EtherExpress PRO 10+ ISA adapter card into an ISA slot.
  • Page 22 8 Installing the Intel EtherExpress PRO 10+ ISA Ethernet Adapter Connecting to a Novell NetWare 4.11 Server 8 Log onto Windows NT4 Workstation with administrator privileges (Contact your network administrator if you do not have the required information). 9 Right-click on the “Network Neighborhood” icon and select “Properties”. 10 Click on “Yes”...
  • Page 23 33 Click on the “Login” tab and specify your Name and Password to login. 34 Install the Windows NT4 Service Pack 4 application to correct the error messages in the Event Viewer. 35 Install the Hewlett-Packard Soft Power Down application once the Service Pack 4 has been installed.
  • Page 24 • Microsoft Windows NT 3.51 Server system that supports NetBEUI, NWLink IPX/SPX Compatible Transport, and NWLink NetBIOS network protocols. Device Configuration Device Configuration Vectra Vli8 Vectra VEi7 Vectra VEi8 Interrupt I/O Address Procedure 1 With the HP Vectra turned off, install the Intel EtherExpress PRO 10+ ISA adapter card into an ISA slot.
  • Page 25 9 Installing the Intel EtherExpress PRO 10+ ISA Ethernet Adapter Connecting to a Windows NT 3.51 Server 9 Open the “Network” icon in the “Control Panel” program group. 10 Click on “YES” in the “Network Settings” dialog box to install Windows NT Networking.
  • Page 26 • Microsoft Windows NT 4.0 Server system that supports NetBEUI, NWLink IPX/SPX Compatible Transport, and NWLink NetBIOS network protocols. Device Configuration Device Configuration Vectra Vli8 Vectra VEi7 Vectra VEi8 Interrupt I/O Address Procedure 1 With the HP Vectra turned off, install the Intel EtherExpress PRO 10+ ISA adapter card into an ISA slot.
  • Page 27 10 Installing the Intel EtherExpress PRO 10+ ISA Ethernet Adapter Connecting to a Windows NT 4.0 Server 9 Open the “Network” icon in the “Control Panel” program group. 10 Click on “YES” in the “Network Settings” dialog box to install Windows NT Networking.
  • Page 28 • Novell NetWare 4.11 Server system that supports IPX network protocol. • Novell IntranetWare Client for Windows NT v4.11b installation media. Device Configuration Device Configuration Vectra Vli8 Vectra VEi7 Vectra VEi8 Interrupt I/O Address Procedure 1 With the HP Vectra turned off, install the Intel EtherExpress PRO 10+ ISA adapter card into an ISA slot.
  • Page 29 11 Installing the Intel EtherExpress PRO 10+ ISA Ethernet Adapter Connecting to a Novell NetWare 4.11 Server 9 Open the “Network” icon in the “Control Panel” program group. 10 Click on “YES” in the “Network Settings” dialog box to install Windows NT Networking.
  • Page 30 • Microsoft Windows NT 4.0 Server system that supports NetBEUI, NWLink IPX/SPX Compatible Transport, and NWLink NetBIOS network protocols. Device Configuration Device Configuration Vectra Vli8 Vectra VEi7 Vectra VEi8 Interrupt I/O Address Procedure 1 With the HP Vectra turned off, install the Intel EtherExpress PRO 10+ ISA adapter card into an ISA slot.
  • Page 31 12 Installing the Intel EtherExpress PRO 10+ ISA Ethernet Adapter Connecting to a Microsoft Windows NT4.0 Server 10 Click on the “Install Microsoft Windows Network:” option, and click “OK”. 11 Click on the “Drivers” button from the “Network Setup” dialog box, and click on “Add Adapter”.
  • Page 32 • Novell NetWare 4.11 Server system that supports IPX network protocols. • NetWare Client for DOS and MS Windows v1.21 installation media. Device Configuration Device Configuration Vectra Vli8 Vectra VEi7 Vectra VEi8 Interrupt I/O Address Procedure 1 With the HP Vectra turned off, install the Intel EtherExpress PRO 10+ ISA adapter card into an ISA slot.
  • Page 33 13 Installing the Intel EtherExpress PRO 10+ ISA Ethernet Adapter Connecting to a Novell NetWare 4.11 Server 9 Select option 5 “Select the driver for your network board” and press “Enter”. 10 Select “OTHER DRIVERS”from the Network Board selection. 11 Insert the Intel Pro 10+ driver disk into the floppy drive. 12 Type the path “A:\DOS”...

This manual is also suitable for:

Vectra vei8Etherexpress pro 10+ isa