HP TouchSmart IQ820 - Desktop PC Getting Started Manual page 27

1 Connect the coaxial cable from your TV antenna or TV cable provider to the TV In (B) connector
located on the back of the computer behind the connector cover.
Or
Connect an S-Video cable to the S-Video In connector (A), located on the back of the computer behind
the connector cover. Connect the other end of the cable to your set-top box.
You may need a composite video to S-Video adaptor (sold separately) from the set-top box Video Out
to the S-Video In connector (A).
2 For S-Video, connect audio cable from your set-top box to the Audio Line In (C) connector on the back
of the computer. Use with a Y cable to combine RCA left and right channels (white and red).
3 If you are using a set-top box, connect the IR emitter cable to the IR emitter connector (D) on the back
of the computer to use the remote control. The IR emitter cable is shown in the following illustration.
Adhere the IR emitter (blaster) onto the set-top box IR receiver window. Point the remote control at the
computer (not the set-top box).
A
B
C
D
Getting to Know the HP TouchSmart PC
21