HP TouchSmart IQ820 - Desktop PC Getting Started Manual page 13

Item
C Gigabit
Ethernet LAN
(10/100/1G)
D Digital audio port
(SPDIF Out)
E Audio Line Out
F S-Video In
(select models only)
G TV In
(select models only)
H Stereo Audio In
(select models only)
I IR Emitter (Blaster)
(select models only)
J Computer stand
K Security lock slot
L Power connector
M Wireless keyboard
and mouse receiver
N Cable clip
Function (continued)
Connect to the Internet through your wired network.
Connect to your home theater system or your surround sound digital speakers.
Supports 3.1, 4.1 and 5.1 speakers.
Connect external 2.0 and 2.1 powered speakers.
Capture analog video from a video camera, or connect to a set-top box for TV
input.
Connect your TV signal source to watch, record, and pause live TV. This is an
F-type coaxial TV input signal connector.
Connect audio for A/V input from a set-top box, digital video camera, or other
video device.
Adhere to your TV set-top box IR receiver area to receive the remote control signal
for watching and recording TV programs. This is not required if you do not use a
set-top box. A remote control is included with select models only.
Slide stand for stability and best viewing angle. The stand supports an adjustable
tilt angle between 10 and 40 degrees from the vertical.
To ensure the computer is in a stable position on your desktop, pull the computer
stand open until you hear it snap into place.
Insert a security lock (sold separately), which enables you to secure your
computer from theft and unwanted changes.
Plug the power adapter into the computer.
Preinstalled receiver for using a wireless keyboard and mouse.
Route your cables through the clip, close the connector cover, and then route the
cables through the notch in the computer stand.
Getting to Know the HP TouchSmart PC
7