Connecting The Power Source; Cable Management - HP TouchSmart 600-1000 - Desktop PC Getting Started Manual

Connecting the Power Source

Plug the power cord into the AC adapter (external power supply), and the AC adapter cord into the back
of the computer. Route the power cord through the notch in the computer stand, and then plug the power
cord into an AC power source through a surge protector/uninterruptible power supply (UPS).

Cable Management

The HP TouchSmart PC includes a cable-management feature located behind the back connector cover. To
use the cable-management feature:
1 Remove the connector cover on the back of the computer by inserting your finger under the gap on the
bottom-left side of the cover (A), and then pulling straight out gently (B).
10
User Guide (Features may vary by model)
A B