Speakers And Sound; Internet Access - HP TouchSmart 520-1200 Getting Started Manual

Speakers and sound

Symptom Possible solution
Volume is very Ensure that you connected the speakers to the Audio Out connector on the back of the
low or computer. (Additional audio connectors are used for multiple-channel speakers.) Detached
unsatisfactory. non-powered speakers (speakers without a separate power source, such as batteries or a
power cord) do not produce satisfactory sound. Replace the non-powered speakers with
powered speakers.
No sound is For Windows 7:
produced.
1. Tap the Start button, tap Control Panel, tap Action Center, and then tap
Troubleshooting.
2. Under Hardware and Sound, tap Troubleshoot and audio playback.
If you are using built-in computer speakers, use the Volume button to adjust volume. You
can also use My Display TouchSmart Edition to ensure that the volume is set appropriately.
Ensure that you connected powered (active) speakers and that they are turned on.
Turn off your computer, and then unplug and reconnect the speakers. Ensure that the
speakers are connected to an audio connector, not a Line In or headphone connector.
To resume from Sleep mode, press the Sleep button (select models only), or press Esc.
Unplug headphones if they are connected to your computer (or speaker system).
When external When an Audio Line Out connector (such as headphones or external speakers) is
speakers are connected, the internal speakers are muted.
connected, the
audio is muted.

Internet access

Symptom Possible solution
Internet programs Log in to your Internet Service Provider (ISP), and start the desired program.
do not start
automatically.
ENWW
Speakers and sound
21