Configuration; Logging On; Automatic Logon - HP T5720 - Compaq Thin Client Quick Reference Manual

Microsoft windows xpe-based thin clients

Hide thumbs Also See for T5720 - Compaq Thin Client:

Table of Contents

Configuration

You can log on to your thin client either automatically or manually.

The default for the XPe-based thin client is automatic logon. The administrator can use the HP Windows

Logon Configuration Manager in the Control Panel to enable/disable auto logon and change the auto

logon user name, password, and domain. Only the administrator account can change auto logon

properties.

NOTE:

To save changes, be sure to disable the write filter cache or issue the -commit command

anytime during the current boot session. See

information about and instructions for disabling the write filter. Enable the write filter when you no longer

want permanent changes.

Enabling automatic logon bypasses the Log On to Windows dialog box. To log on as a different user

while auto logon is enabled, press and hold

displays the Log On to Windows dialog box and allows you to type in the logon information.

ENWW

Enhanced Write Filter Manager on page 29

Shift

while clicking Start > Shut Down > Log Off. This

for

Logging on

Table of Contents

Do you have a question about the T5720 - Compaq Thin Client and is the answer not in the manual?

Compaq t5730