Step 3: Preparing For Network Connection; Step 4: Easy Setup - Sony BDP-S3100 Operating Instructions Manual

Step 3: Preparing for
Network Connection
If you are not going to connect the player
to a network, proceed to "Step 4: Easy
Setup" (page 16).
Wired Setup
Use a LAN cable to connect to the LAN
(100) terminal on the player.
Internet ADSL modem/
Cable modem
z
Using a shielded interface cable (LAN cable),
straight or crossing, is recommended.
Wireless Setup
Use the wireless LAN that is built into
the player.
LAN cable (not supplied)
Wireless LAN
router
16
LAN cable
(not supplied)
Broadband
router
ADSL modem/ Internet
Cable modem

Step 4: Easy Setup

When turned on for the first time
Wait for a short while before the
player turns on and starts [Easy
Initial Settings].
1
Insert two Size AA (R6) batteries
by matching the 3 and # ends on
the batteries to the markings
inside the battery compartment.
2
Plug the player into the AC outlet.
to AC outlet
3
Press [/1 to turn on the player.
4
Turn on the TV and set the input
selector on your TV. This will
show the signal from the player
on your TV screen.