Peripherals; Printers; Adding Printers Using Generic Text-Only Print Driver - HP t5630 - Thin Client Quick Reference Manual

7

Peripherals

Depending on the ports available, the thin client can provide services for USB, serial, parallel, and PCI
devices, as long as the appropriate software is installed. Factory-installed software is described in the
following section. As they become available, you can install add-ons for other services using the Altiris
Deployment or HP Device Manager solution software. For more information, see
on page 30
For more information about available peripherals, see the model QuickSpecs at
http://h10010.www1.hp.com/wwpc/us/en/sm/WF04a/12454-321959-89307-338927-89307.html?
jumpid=re_R295_prodexp/busproduct/computing/thinclients454-321959-89307-338927-89307.html.
Select the model, select Specifications, and then click the QuickSpec link.

Printers

A generic universal print driver is installed on the thin client to support text-only printing to a locally
connected printer. To print full text and graphics to a locally connected printer, install the driver provided
by the manufacturer and follow the manufacturer's instructions. Be sure to disable the write filter cache
or run the -commit command to save the installation. You can print to network printers from ICA and
RDP applications through print drivers on the servers.
For additional information, please review the Printing and Imaging Support on HP Compaq Thin
Clients white paper on the HP support site at
SupportManual/c00739537/c00739537.pdf?jumpid=reg_R1002_USEN.
CAUTION:
available system memory is reduced to less than 15MB, the thin client becomes unstable.
NOTE: Downloading and using printers requires sufficient flash space. In some cases, you may have
to remove software components to free up space for printers.
Printing to a locally-connected printer from an ICA or RDP session using the print drivers of the server
produces full text and graphics functionality from the printer. To do this, you must install the print driver
on the server and the text-only driver on the thin client (see the following section).

Adding Printers Using Generic Text-only Print Driver

Follow these steps to add a printer using the text-only print driver:
1. Connect the printer to the parallel port.
2. Choose Printers and Faxes from the Start > Settings menu.
3. Select Add a Printer to open the Add Printer Wizard.
and HP Management Agent on page
If the available free space on the flash memory is reduced to less than 10MB and/or the
32.
http://h20000.www2.hp.com/bc/docs/support/
Altiris Client Agent
Printers 51