Service Considerations; Tool And Software Requirements - Compaq Presario 1800 - Notebook PC Maintenance And Service Manual

| Home Page
Illustrated Parts Catalog

Service Considerations

Listed below are some of the considerations that you should keep in mind
during the disassembly and assembly of the computer.

Tool and Software Requirements

To service the computer, you need the following:
Compaq screwdriver kit (Spare Part No. 161946-001)
Torx T-9 screwdriver
5mm nut drivers (for screwlocks and standoffs)
Small, standard screwdriver
Small, Phillips screwdriver
Plastic shroud
Diagnostics software
Screws
The screws used in the computer are not interchangeable. If an incorrect
screw is used during the reassembly process, it can damage the unit. Compaq
strongly recommends that all screws removed during disassembly be kept
with the part that was removed, then returned to their proper locations.
As each subassembly is removed from the computer, it should be
IMPORTANT:
placed away from the work area to prevent damage.
Return to Removal & Replacement Procedures
Maintenance & Service Guide
Presario 1800 Series
Models: 1805 and 1810
| Notice | Preface
| Removal & Replacement Procedures
Pin Assignments
| Product Description
| Battery Pack Operations
| Troubleshooting
| Specifications