Figure 4.35 Removing The Display Assembly; Display Assembly; Removing The Display Assembly - Toshiba Satellite A660-BT3G25X Maintenance Manual

4.20

Display Assembly

Removing the Display Assembly

Remove the display assembly according to the following procedures and Figure 4.35.
1. Lift up the LVDS cable tab as shown in Figure 4.35.
2. Peel back the tape on the LVDS cable connector and disconnect the LVDS cable.
3. Remove the six M2.5x5 screws securing the display assembly as shown in Figure 4.35.
4. Remove the display assembly.
M2.5x5*3
Satellite A660/ProA660 Series Maintenance Manual

Figure 4.35 Removing the display assembly

4 Replacement Procedures
M2.5x5*3
4-45