Lc Drives Section - Seagate ST373455LC - Cheetah 73.4 GB Hard Drive Installation Manual

Barracuda 18LP Installation Guide, Rev. B 45
LC drives
Setting the SCSI ID jumpers WC/DC drives section
The SCSI ID for "LC" model drives is normally set over the SCSI
bus by the host system using connector contacts 39 (ID0), 40
(ID2), 79 (ID1), and 80 (ID3). Users need not install jumpers to
select SCSI ID.
Terminating the drive
"LC" model drives do not have internal terminators or any other
way of adding internal termination to the drive. External termina-
tion for these drives must be supplied by the host equipment.