Epson SureLab D3000 - Double Roll Operation Manual page 11

Item
Print Settings Paper Type
Image Quality
Color
Print Preview
Paper Source Paper Source
Settings
Paper Size
Borderless
Printer Status
Trimmed Waste Paper Box
Paper Information
Ink Level
Reset Defaults
Printer Driver Functions
Select the Paper Type according to the paper being used.
Select the print quality from Standard (720 dpi) and High Image Quality (1440 dpi).
Normally, select Standard. Select High Image Quality when you want to print at a
higher resolution. Printing takes longer than in Standard mode, as priority is given to
image quality.
You can only select High Image Quality when Glossy or Luster is set as the Paper Type.
Select the color adjustment method to apply while printing.
U"Color" on page 21
Select to display a preview before printing.
U"Previewing an Image" on page 31
Displays Paper Source. You can select only AutoSelect.
AutoSelect automatically selects the paper source (front or rear) according to the loaded
paper.
Select the paper size used for printing.
You can register sizes that are not already included in the list by using User Defined.
U"Printing on Custom Paper" on page 29
Select to print without margins around the edge of the paper.
If this is not selected, margins may appear around the edges of the print, depending on
the operating environment and so on. You can also set the amount of the margins from
your software.
U"Borderless Printing" on page 27
Displays the printer's current status.
Displays the usage status of the trimmed waste paper box.
Displays the width, type, and amount remaining for the loaded paper.
Displays the ink levels.
Returns all settings to their defaults.
11
Explanation