Ipod; Other - Denon DHT-788BA Owner's Manual

ENGLISH
Digital In
Select digital input connector to assign to this source.
[Input source] CD AUX CDR
V.AUX
[Selectable items]
COAX1
: Assign COAXIAL 1 input connector.
COAX2
: Assign COAXIAL 2 input connector.
OPT1
: Assign OPTICAL 1 input connector.
OPT2
: Assign OPTICAL 2 input connector.
None
: No digital input connector assigned.
Input DVD/
CD AUX CDR
source
Default
OPT1 None None COAX1 COAX2
setting
Component In
Select component video input to assign to this source.
[Input source] DVD/HDP TV/CBL
[Selectable items]
1-RCA
: Assign component video 1 input connector.
2-RCA
: Assign component video 2 input connector.
3-RCA
: Assign component video 3 input connector.
None
: No component video input connector assigned.
Input source DVD/HDP TV/CBL
Default setting 1-RCA 2-RCA

iPod dock
Assign Control Dock for iPod to this source.
DVD/HDP TV/CBL VCR [Input source] CD AUX CDR
[Selectable items]
Assign
: Assign iPod input.
None
: Do not assign iPod input.
With the default settings, the Control Dock for iPod can be used
connected to the VCR (iPod) connector.
TV/CBL VCR V.AUX
HDP

iPod

OPT2 None
Make settings for "iPod" playback.
[Input source] CD AUX CDR
VCR V.AUX
Repeat
Make settings for repeat mode.
[Selectable items]
All
: Repeat all songs.
One
: Repeat the current song.
OFF
: Cancel repeat mode.
VCR V.AUX
3-RCA
None
DVD/HDP TV/CBL VCR
V.AUX
DVD/HDP TV/CBL VCR
V.AUX
Shuffle
Make settings for shuffle mode.
[Selectable items]
Songs
: Shuffle all songs.
Albums
: Shuffle songs from current album only.
OFF
: Cancel shuffle mode.
This can be selected for input sources for which "Assign" is assigned
at the "iPod dock" setting.

Other

Make various other settings.
Video Select
Switch video input source while listening to audio signal.
[Selectable items]
DVD/HDP TV/CBL VCR V.AUX
:
Select video input source to view.
Source
:
The video and audio for the same input source are played.
Operating from the main unit or remote control
unit
Press the VIDEO SELECT button on the main unit or the V. SELECT button
on the remote control unit until the desired picture appears.
b To cancel, press the VIDEO SELECT button on the main unit or the
V. SELECT button on the remote control unit to select "Source" .
NOTE
• It is not possible to select HDMI input signals.
• When playing HDMI video input signals, the analog video signal of
another input source cannot be selected for the HDMI video output.
• Input sources for which "Delete" is selected at "Source Delete"
cannot be selected.