HP Rx2620-2 - Integrity - 0 MB RAM Supplementary Manual page 7

2. Copy the default boot entry (boot entry 1) using the following command:
C:\>bootcfg /copy /d "Safe Mode Minimal" /id 1
The system should indicate that it successfully copied boot entry 1. The new entry is appended to the
list. In our example, the new boot entry is assigned ID 4.
3. Change the options of the new boot entry by entering the following command:
C:\>bootcfg /raw "/safeboot:minimal /sos /bootlog /redirect" /id 4
4. Copy the default boot entry to another boot entry (ID 5) using the following command:
C:\>bootcfg /copy /d "Safe Mode Network" /id 1
The system should indicate that it successfully copied boot entry 1. The new entry is appended to the
list. In our example, the new boot entry is assigned ID 5.
5. Change the options of the new boot entry by entering the following command:
C:\>bootcfg /raw "/safeboot:network /sos /bootlog /redirect" /id 5
Using nvrboot
The nvrboot (nvrboot.efi) command launches an EFI-based boot entry editor that you can run while the
OS is shut down. Using nvrboot, you can edit, export back up copies, and import backup copies of boot
entries into NVRAM. You can access nvrboot from the EFI Shell in the msutil directory of the system
partition (fsN:/msutil/nvrboot.efi, where N is the number of the filesystem).
To add two safe modes — minimal and network — to the EFI boot option menu using nvrboot:
1. From the EFI shell, navigate to the MSUtil directory and execute the NVRBOOT.EFI command, as
shown here:
fs1:\> dir
fs1:\> cd msutil
fs1:\MSUtil> nvrboot
NVRBOOT: OS Boot Options Maintenance Tool [Version 5.1.3550]
*1. Windows Server 2003, Enterprise
2. Internal Bootable DVD
3. EFI Shell [Built-in]
(D)isplay (M)odify (C)opy E(x)port (I)mport (E)rase (P)ush (H)elp (Q)uit
2. Select C and enter 1 to copy boot entry 1.
3. Select M and enter 4 to modify the new boot entry.
• Enter 1 to change the identifier: LoadIdentifier=Safe Mode Minimal
• Enter 2 to change the options: OSLoadOptions=/safeboot:minimal /sos /bootlog /redirect
4. Again, select C and enter 1 to copy boot entry 1 (for the safe mode network entry).
5. Select M and enter 5 to modify the new boot entry.
• Enter 1 to change the identifier: LoadIdentifier=Safe Mode Network
• Enter 2 to change the options: OSLoadOptions=/safeboot:network /sos /bootlog /redirect
7