Installing The Mpt Fusion Hba Drivers For Linux - HP Rx2620-2 - Integrity - 0 MB RAM User Manual
For integrity with linux
Hide thumbs
Also See for Rx2620-2 - Integrity - 0 MB RAM:
- Service manual (177 pages) ,
- Manual (122 pages) ,
- User manual (110 pages)
Table of Contents
Advertisement
Adapter Part No.
AD168A
AE311A
AD300A
A8002A
A8003A
403619-B21
If any entries are shown that match the model numbers listed, update the driver using the
following steps:
1.
Go to http://www.hp.com/.
2.
Click Software & Drivers.
3.
Click Download drivers and software (and firmware).
4.
In the For Product field, enter the model number of your Fibre Channel adapter (for example,
A6826A).
5.
Press Go.
6.
Select the appropriate OS from the Product search results list.
7.
Click the Download button for the latest Linux Driver Kit for Qlogic HBAs and Qlogic-based
mezzanine HBAs driver to obtain a tar archive of all necessary files
NOTE:
all drivers for Qlogic adapters are contained in this driver kit.
8.
Unpack the driver files in the kit. For example, the following command could be used:
# tar zxvf hp_qla2x00-date.tar.gz
9.
Change to the directory that was created in the previous step.
10. Install the driver:
# ./INSTALL
For additional information, see the documentation that is included with the Linux Driver Kit for
Qlogic HBAs and Qlogic-based mezzanine HBAs.
Installing the MPT Fusion HBA Drivers for Linux
Support for the HP Insight Management Agent for the Core 8 port Serial Attached SCSI (SAS)
HBA on the rx2660 server, or BL860c, and BL870c server blades is not included with the MPT
Fusion driver that is shipped with the Red Hat and Novell Linux distributions. However, HP
Insight Management Agent support is included with the MPT Fusion driver that is shipped with
RHEL4.6 and RHEL4.7.
If you are running HP Insight Management Agents for these HBAs on one of the listed servers,
you must update the driver using the following steps:
1.
Go to the
2.
Click on the appropriate product link for your server.
3.
Click the Download drivers and software link.
4.
Select a software/driver language from the list.
Output of lspci Command
Fibre Channel: Emulex Corporation Helios-X LightPulse Fibre Channel
Host Adapter (rev 01)
Fibre Channel: QLogic Corp. QLA2432 Fibre Channel Adapter (rev 02)
Fibre Channel: QLogic Corp. QLA2432 Fibre Channel Adapter (rev 02)
Fibre Channel: Emulex Corporation Zephyr LightPulse Fibre Channel Host Adapter (rev
01)
Fibre Channel: Emulex Corporation Zephyr-X LightPulse Fibre Channel Host Adapter
(rev 02)
Fibre Channel: QLogic Corp. QLA2432 Fibre Channel Adapter (rev 02)
All drivers for a given brand of adapter are contained in one driver kit. In this case,
http://www.hp.com/support/itaniumservers/
website.
Installing the MPT Fusion HBA Drivers for Linux
33
Advertisement
Table of Contents
