HP Rx2620-2 - Integrity - 0 MB RAM User Manual page 52

Trust by Certificate
1
Sets HP SMH to accept
configuration changes only
from HP SIM servers with
certificates
trusted
requires the submitted server
to provide authentication by
means of certificates. This
mode is the strongest method
of security because it requires
certificate data and verifies the
digital signature before
allowing access. If you do not
want to enable remote
configuration changes, leave
Trust by Certificate selected,
and leave the list of trusted
systems empty by not
importing certificates.
This is the default behavior on
Linux Itanium.
HP strongly recommends using
this option because it is more
secure.
Trust by Name
2
Sets HP SMH to accept
configuration changes only
from servers with HP SIM
names designated in the Trust
By Name field. For example,
you might use this option if
you have a secure network
with two groups of
administrators in two divisions.
It prevents one group from
installing software to the
wrong system. This option
verifies only the HP SIM server
that you designate.
HP strongly recommends using
the Trust by Certificate option
because the other options are
less secure.
Trust all
3
Sets HP SMH to accept
specific configuration changes
from systems. For example,
you could use the Trust All
option if you have a secure
network, and everyone in the
network is trusted.
HP strongly recommends using
the Trust by Certificate option
because the other options are
less secure.
52 The Settings Page
Server Certificate Name
4
When a server certificate
name is entered, it checks if
the server name:
. This mode
Is valid (a maximum of
64 characters)
Contains invalid
characters
Is already in the list
Add
5
Add the server name to the
list.
Server Certificate Name Enable
6
All
Checks all checkboxes in the
listings.
Remove
7
Removes the selected server names
from the list.
Apply
8
Records the registers in to the XML
configuration file.