Kerberos Administrator; Kerberos Operator; Kerberos User - HP Rx2620-2 - Integrity - 0 MB RAM User Manual

Kerberos support is provided on a per-user basis.

Kerberos Administrator

To add a Kerberos Administrator:
1. Select Settings from the menu.
2. In the System Management Homepage box, click the Security link.
3. Click the Kerberos Authorization link.
4. In the Kerberos Configuration area, select the box beside Enable Kerberos Support.
5. In the Group Name textbox, enter a name in the group@REALM format or REALM\group
Only alphanumeric and underline values are permitted. The use of special characters such as ~ ' ! # $
% ^ & * ( ) + = / " : ' < > ? , | ; are not permitted.
6. Click the Administrator radio button beside Type.
7. Click Add. The values entered are added as a new line in the list table.
You can continue to add groups with administrative access by following steps 5 through 7.
8. Click Apply.
To remove a Kerberos Administrator:
1. Select Settings from the menu.
2. In the System Management Homepage box, click the Security link.
3. Click the Kerberos Authorization link.
4. Click the check box beside the Group Name in the dynamic list that you want to remove from HP SMH.
5. Click Remove.
6. Click Apply.

Kerberos Operator

To add a Kerberos Operator:
1. Select Settings from the menu.
2. In the System Management Homepage box, click the Security link.
3. Click the Kerberos Authorization link.
4. In the Kerberos Configuration area, select the box beside Enable Kerberos Support.
5. In the Group Name textbox, enter a name in the group@REALM format or REALM\groupname.
Only alphanumeric and underline values are permitted. The use of special characters such as ~ ' ! # $
% ^ & * ( ) + = / " : ' < > ? , | ; are not permitted.
6. Click the Operator radio button beside Type.
7. Click Add. The values entered are added as a new line in the list table.
You can continue to add groups with operator access by following steps 5 through 7.
8. Click Apply.
To remove a Kerberos Operator:
1. Select Settings from the menu.
2. In the System Management Homepage box, click the Security link.
3. Click the Kerberos Authorization link.
4. Select the check box beside the Group Name in the dynamic list that you want to remove from HP SMH.
5. Click Remove.
6. Click Apply.

Kerberos User

To add a Kerberos User:
1. Select Settings from the menu.
2. In the System Management Homepage box, click the Security link.
3. Click the Kerberos Authorization link.
System Management Homepage Box 55