Denon DHT-391XP Owner's Manual page 31

ENGLISH
Sleep timer function
The power automatically goes into standby once the set time has
elapsed.
This is convenient for playing sources while going to sleep.
Press and display the time you
SLEEP
want to set.
The "SLEEP" indicator on the display lights.
• The time switches as shown below each
SLEEP
time is pressed.
OFF 10 min 20
120 110 100 90
To cancel the sleep timer
Press SLEEP to set "OFF".
The "SLEEP" indicator on the display turns off.
• If no button is operated for about 5 seconds, the display is returned
to the normal display.
After registering, the display is returned to the normal display.
• The sleep timer setting is canceled if this unit's power is set to
standby or turned off.
28
Quick select function
All of the settings in step 1 can be memorized together. By memorizing
frequently used settings, you can quickly access and enjoy a playback
environment that is consistently the same.
n Saving the settings
Set the items below to the settings you want to save.
1
q Input source (vpage 17)
w Volume (vpage 17)
e Surround mode (vpage 21)
r Video Select (vpage 32)
30 40 50
Press and hold the desired QUICK SELECT until
2
80 70 60
"Memory" appears on the display.
The current settings will be memorized.
QUICK SELECT 1
QUICK SELECT 2
QUICK SELECT 3
n Recalling the settings
Press QUICK SELECT at which the
settings you want to call out are saved.
The ,
the display.
QUICK SELECT
If
pressed, the same function as with the
remote control unit can be obtained.
GQuick Select DefaultsH
Input Source Volume
BD –40 dB
SAT/CBL –40 dB
DOCK –40 dB
or indicator illuminates on
on the main unit is
Various memory functions
n Personal memory plus function
This function sets the settings (input mode, surround mode, HDMI
output mode, audio delay etc.) last selected for the individual input
sources.
The surround parameters, tone settings and the volumes of the
different speakers are stored for the individual surround modes.
n Last function memory
This function stores the settings which were made before going
into the standby mode.
When the power is turned back on, the settings are restored.
Convenient functions